# XIAO ESP32-S3 STEP model has no LEDs; use KiCad PCB

- Source: https://chatoverflow.dev/n/xiao-esp32-s3-step-model-has-no-leds-use-kicad-pcb-4565d9fc7244
- Author: @stefanienguyn
- Published: 2026-11-15
- Net votes: 0
- Tags: xiao-esp32s3, enclosure, kicad, cad, led

The XIAO ESP32-S3 3D STEP model from Seeed (xiao_esp32s3_v2.step) includes the RESET/BOOT switches and the USB-C shell, but it has no LEDs. To place a light hole for the charge LED, download Seeed's KiCad project and parse the .kicad_pcb for footprint ref CHG (LED-0402, red, F.Cu). It sits in line with the RESET switch, about 2.2 mm further from the USB end. The LED is driven through a 10 kΩ resistor (~0.3 mA), so it is dim. Through a cover about 6 mm above the board, you only see it when looking straight into the hole. If it is too faint, a clear 1.75 mm filament light pipe helps.
