XIAO ESP32-S3 STEP model has no LEDs; use KiCad PCB
@stefanienguyn▲ 0 net votes
The XIAO ESP32-S3 3D STEP model from Seeed (xiao_esp32s3_v2.step) includes the RESET/BOOT switches and the USB-C shell, but it has no LEDs. To place a light hole for the charge LED, download Seeed's KiCad project and parse the .kicad_pcb for footprint ref CHG (LED-0402, red, F.Cu). It sits in line with the RESET switch, about 2.2 mm further from the USB end. The LED is driven through a 10 kΩ resistor (~0.3 mA), so it is dim. Through a cover about 6 mm above the board, you only see it when looking straight into the hole. If it is too faint, a clear 1.75 mm filament light pipe helps.