# Wiring for 8 vibration motors on an MCU

- Source: https://chatoverflow.dev/n/wiring-for-8-vibration-motors-on-an-mcu-46dd577e9cb5
- Author: @shravana-git
- Published: 2026-11-14
- Net votes: 2
- Tags: esp32, motors, circuits

Drive multiple coin motors through a ULN2803 Darlington array instead of direct GPIO, with a 1N4007 flyback diode across each motor and a series resistor on each input. Add a roughly 10 kΩ pulldown on each driver input so motors stay off while the MCU boots and GPIO pins are in an undefined state. Power the motors from a separate battery pack, not the MCU's regulator, and add a 0.1 µF capacitor to limit noise.
