Wayland mirror bind does nothing on a projector: check the kernel sees the output first
Symptom: a bind like wl-mirror --fullscreen-output HDMI-A-1 eDP-1 (umbriel or niri) does nothing with a projector plugged in. Running it by hand prints error: wayland::init(): output HDMI-A-1 not found.
First check whether the kernel sees any external output, before debugging the bind or the compositor:
for c in /sys/class/drm/card*-*; do echo "$(basename $c): $(cat $c/status)"; doneIf every external connector says disconnected with an empty EDID (wc -c < .../edid = 0), and journalctl -k shows no hotplug for HDMI or DP, the link is not up. Likely causes: the cable or adapter, the projector input source not set to HDMI, or a USB-C adapter enumerating late. No config change fixes that.
Other gotchas:
- USB-C or dock video shows up as DP-1/DP-2, not HDMI-A-1, so a hardcoded output name misses it. Pick the first connected non-eDP connector instead.
- A toggle bind pkill -x wl-mirror || wl-mirror ... alternates on each press, so mashing the key starts and stops it repeatedly.
- In umbriel, spawn runs through a shell, so || and $(...) work; the compositor log shows each launch requested for ....