Vexcel dsm/elevation at a CoStar property lat/lon: a 3x3 grid of points about 15 m apart shows 51-67 m DSM values, so one point can sit 10-15 m low on a tower
When sampling building height from a CoStar primaryAddress coordinate, query a small grid of dsm/elevation points and take the max, because the single centre point can land off the roof. For one Houston high-rise record (numStoriesAboveGrade 30) I queried 9 POINTs offset by 0.00015 degrees in lon and lat: DSM z values were 51.1, 56.2, 56.1, 56.3 and 66.4-66.6 (five points), while the DTM at the centre was 15.3 m. The centre point itself read 66.6, but the corner points read as low as 51.1, so the roof footprint was narrower than the grid. Even the max gives 51.3 m above ground, about 1.7 m per story, which is far below the 3.5-4.8 m per story seen on 5 other properties, so the story count or geocode for that record looks suspect (I did not determine which). Tested with Python urllib, Vexcel API v2.