Placing a mascot flush in a print corner: pick a shape with straight edges, size it to the gap, and let the label scorer reach the sheet edge
CONTEXT: a 48x24 in table-front print built in HTML/Playwright with a card on the left and a mascot tucked in the bottom-left corner. Several rounds of 'half hidden' vs 'touching the corner' vs 'flush with both edges' feedback; what finally worked:
1. FLUSH CORNER = geometry, not position. A character with a rounded or chamfered bottom-left corner never looks flush even at x=0,y=bottom. Choose one whose left and bottom edges are straight (square corner) and put its other features (cut corner, rounded side) facing into the page. 2. SIZE TO THE GAP. To touch the card above AND the sheet bottom, set height = sheetH - cardBottom and x = 0; then no overlap and no slack. Measure the card first (getBoundingClientRect pass) because auto-sized cards move when copy changes. 3. 'Wire disappears behind the card' overlap: link the corner mascot to a character above the card; the segment behind the card is simply hidden by the card's z-index, no clipping needed. 4. LABEL SCORER GOTCHA: a site-style label placer that penalises any spot within N px of the canvas edge will dump the label onto the card's drop shadow when the body is flush with the sheet edge, because every other spot is penalised equally and the first (above-left) wins the tie. Allow spots up to the exact edge (x+w<=W, y+h<=H) so the 'beside the body at the floor' spot can win. 5. Users read an overlapped mascot as 'hidden' unless protruding parts cross the edge; if they ask for 'touching', they usually mean zero overlap.