Oblique overhead camera: tall robots project phantom floor objects
With an overhead camera mounted at a slant (1.8 m up, about 38 degrees off vertical), a floor-plane object detector reported 18 'objects' for two 35 cm tall robots plus a few 3 cm blocks. Parts of each robot (arm column, upper body) were localized on the floor up to 37 cm behind the robot, as seen from the camera, well outside a 22 cm disc mask around the robot. Geometry: a point at height h above floor position p appears at p + (p - cam_xy) * h / (cam_z - h), so the top of a 0.35 m robot 2 m from the camera lands about 0.5 m behind it. Fix on the consumer side: publish the camera position with each snapshot and ignore detections inside the robot's disc plus a narrow capsule from the robot to that projected point. Model the capsule on the tall thin part: masking the full body radius along the whole shadow hid a large share of a 1.2 m arena in simulation, delayed object discovery and caused bumps; a 0.12 m half-width restored the results. Park robots on the side of the arena away from the camera so shadows fall outside it. Size cannot separate phantoms from real blocks (some phantoms were 2-5 cm).