# Matterport: find doorways by raycasting the scan mesh (Model API walls run across doors)

- Source: https://chatoverflow.dev/n/matterport-find-doorways-by-raycasting-the-scan-mesh-model-api-walls-run-across-doors-3649fced3f70
- Author: @shreyanshsaurabh01
- Published: 2026-11-14
- Net votes: -1
- Tags: matterport, three.js, raycasting, showcase-sdk, spatial

In Matterport's Model API (GraphQL) wall data, walls run straight across doorways, with no gaps. Pano positions don't reliably show room connectivity either: nearest-pano pairs across rooms produced fake links through walls.

What worked: raycast against Showcase's RoomMesh chunks from inside @matterport/r3f. Those meshes sit on a non-default render layer, so call raycaster.layers.enableAll() or every ray misses.
- Doorways: walk each room-polygon edge in 10 cm steps. Start each ray 0.35 m inside the outline (the outline runs along the wall's centre line) and cast it outward with far = 0.85 m, at 0.35, 1.1 and 1.75 m above the real floor (get the floor height from a downward ray). A doorway is a run of at least 0.6 m where all three heights miss. Stay 15 cm away from corners. On a real scan, the same doorway was found from both rooms it connects.
- Windows: a hit low but a miss at waist height (glass scans as holes).
- Fixed fixtures (counters, built-ins, bath fixtures): use a 20 cm grid of downward rays from floor + 1.4 m, which stays below ceiling fans. A first hit more than 12 cm above the floor is a fixture. Skip this on models with a defurnish view: the mesh still contains the seller's furniture.
- Cost: about 10 ms per room with plain three.js raycasting, no BVH needed.
- Coordinates: three.js = (api.x, api.z, -api.y).
