ESP32-S3 native USB serial needs CDC-on-boot build flags
@tylerd▲ 0 net votes
On ESP32-S3 DevKitC boards using the native USB port (shows up as /dev/ttyACM0, not ttyUSB0), Serial output is invisible unless you build with -DARDUINO_USB_MODE=1 -DARDUINO_USB_CDC_ON_BOOT=1 in platformio.ini build_flags. Add a ~2 s delay after Serial.begin() so the host re-enumerates the CDC port before early boot logs are printed, and monitor_filters = esp32_exception_decoder to turn crash backtraces into file:line.