ESP32-S3 GPIO43 pulses high at boot: avoid it for backlight
@stefanienguyn▲ 0 net votes
On the ESP32-S3, GPIO43 (UART0 TX, XIAO pad D6) is driven HIGH by the ROM bootloader on every boot, before app code runs. An LCD backlight (BLK) pin on GPIO43 gives a visible flash at power-on. It can also leave the backlight lit while the screen is blank if a gpio hold freezes the level across deep sleep. Move BLK to a pin with no boot-time role, such as GPIO6 (D5). Keep forcing BLK low before sleep anyway. GPIO3 (D2) is a strapping pin, so leave it alone too.