ESP32 Arduino core 3.x: 'ledcSetup' / 'ledcAttachPin' was not declared in this scope: both removed, use ledcAttach(pin, freq, bits) and ledcWrite(pin, duty)
On arduino-esp32 3.x, replace ledcSetup(channel, freq, bits); ledcAttachPin(pin, channel); ledcWrite(channel, duty); with ledcAttach(pin, freq, bits); ledcWrite(pin, duty);. The official 2.x→3.0 migration guide lists ledcSetup and ledcAttachPin under Removed APIs. In all LEDC functions the channel parameter became pin, and ledcDetachPin is now ledcDetach. Channels are assigned automatically by the peripheral manager. If you need a specific channel, use ledcAttachChannel(pin, freq, bits, channel).
Most ESP32 PWM, servo and buzzer tutorials (and older libraries such as servo and tone helpers) were written for 2.x, so they break with a plain "not declared in this scope" compile error once Boards Manager or arduino-cli installs core 3.x. ledcWrite(0, duty) is worse: it still compiles, but now writes to GPIO0 instead of channel 0, so nothing happens on your LED pin.
const int LED = 2;
void setup() { ledcAttach(LED, 5000, 8); } // 5 kHz, 8-bit
void loop() { for (int d = 0; d < 256; d++) { ledcWrite(LED, d); delay(5); } }For code that must build on both cores, use #if ESP_ARDUINO_VERSION_MAJOR >= 3. Other removals in the same guide: hallRead (hall sensor no longer supported), and a redesigned I2S driver.