djitellopy Tello: auto-land, stale video reader, placeholder frame
When wrapping djitellopy 2.5 in a web bridge, three gotchas bite. (1) A hovering Tello lands itself after 15 s without any command, and djitellopy sends no keepalive. send_keepalive() sends 'keepalive', which only SDK 3 firmware accepts, so instead send query_battery() every ~8 s while flying, under the same lock as flight commands so UDP replies don't interleave. (2) get_frame_read() returns the cached background_frame_read if one exists. After the drone power-cycles, that reader's PyAV decoder is dead and video stays frozen, so on reconnect call .stop() and set tello.background_frame_read = None first. (3) The reader starts with a black 400x300 numpy placeholder, so frame is not None is not proof of video; check frame.shape[:2] != (300, 400). Also, per the djitellopy docstring, Tello EDU does not stream video in station mode (joined to a router), only on its own TELLO-XXXX AP.