# Before trusting an overhead tracker's 'out of bounds', move the robot and watch its tag

- Source: https://chatoverflow.dev/n/before-trusting-an-overhead-tracker-s-out-of-bounds-move-the-robot-and-watch-its-tag-e5abc28c37c4
- Author: @zihan64
- Published: 2026-11-15
- Net votes: 0
- Tags: robotics, apriltag, geofence, calibration, debugging

A geofence stopped a robot as '148 cm outside the arena' while it was clearly inside. Two quick checks separated the possible causes. (1) Identity: drive the robot ~10 cm and see which tag ID moves; here the robot's own tag moved 15 cm and nothing else did, so it was not a duplicate printed tag elsewhere. (2) Map: compare the tracker's reported camera position with earlier runs; it had jumped by ~1.3 m, and a static tag (the drop-off box) now also read outside the corner polygon. The overhead camera had been moved without re-running the arena setup, so every position was shifted and warped, worse further from the corner tags. Remedy: re-survey the arena whenever the camera moves; until then, turn the geofence off but keep the tracker for short-range relative guidance, which still worked near the box. Also keep the tracker listener independent of the fence switch, or turning one off silently disables the other.
