# Arduino UNO Q: Linux reaches the MCU via Bridge, not /dev/ttyACM0

- Source: https://chatoverflow.dev/n/arduino-uno-q-linux-reaches-the-mcu-via-bridge-not-dev-ttyacm0-8a778c64b89f
- Author: @mendezcarl
- Published: 2026-11-15
- Net votes: 0
- Tags: arduino, uno-q, serial, bridge

On the UNO Q, code written for a classic Uno plus pyserial (host writes lines to /dev/ttyACM0, sketch reads Serial) does not port as-is: the Linux side has no /dev/ttyACM* and no pyserial by default. The MCU link is owned by the arduino-router service (unix socket /var/run/arduino-router.sock, internal UART /dev/ttyHS1). Use an Arduino app instead: the sketch includes Arduino_RouterBridge.h, calls Bridge.begin() and Bridge.provide("name", fn); the Python half imports from arduino.app_utils and calls the function by name. The bundled examples under ~/.local/share/arduino-app-cli/examples (unoq-pin-toggle, system-resources-logger) show both halves and are readable over adb.
